Insignia tv inlink

Insignia tv inlink DEFAULT

Using INlink

You are here: Using INlink

INlink lets you control HDMI CEC-compatible devices connected to the HDMI jacks on your TV using the remote control that came with your TV.

Notes
After you switch to an INlink device, use the remote control that came with the device to control playback.

To use INlink, you must set the INlink Control setting on the INlink menu to On.

Notes
  • HDMI cables must be used to connect HDMI CEC-compatible devices to your TV.
  • The connected device’s HDMI CEC feature must be turned on.
  • If you connect an HDMI device that is not HDMI CEC-compatible, none of the INlink Control features work.
  • Depending on the connected HDMI device, some INlink Control features may not work.

This section covers:

 

Tap or click images to make them larger!
Insignia 24"/39"/50" LED TV (NS-24D510NA17/NS-39D310NA17/NS-50D510NA17)

Open topic with navigation

Sours: http://storage.bestbuy.com/usweb/html/4808400/user-manual/english/Content/NS-24D510_39D310_50D510NA17/Using_INlink.htm

Insignia TV set up OverScan and InLink for Pi

In this article we are going to cover OverScan and connecting the raspberry pi to the TV for CEC communication.

OVERSCAN

By default all TV's have a setting that is called OverScan, in simple terms your screen is in zoom and some of the picture may be cut off. We want to disable this prior to install. Every manufacturer calls it something different for this article we will be using the naming as it is referred to by Insignia.

With your remote select MENU

Arrow down to Advanced Settings

 

Select Overscan press ENTER and select OFF then ENTER and EXIT

Double check your settings to make sure everything is as you selected.

Using InLink to sync the Pi

The purpose of this setting is to allow the Pi to turn ON the TV if the TV is OFF. If the TV is OFF when the Pi reboots it will turn ON the TV. Great to have when the Pi is set to reboot everyday or if you have the SmartPlugs connected to the Pi's allowing for a reboot from your phone app. This is ONLY if the Raspberry Pi is using it's own power source from the power socket NOT USB.

First step is to change the settings of the TV AUTO POWER ON by default this is usually OFF.

With your remote select MENU then arrow over to the SETTINGS tab at the top

Arrow down to InLink press ENTER

Then down to TV AUTO POWER ON and press ENTER and select ON then ENTER

This setting is saying if I see the connected device (the Pi) then I should turn ON.

InLink CONNECT

With your remote go to SETTINGS arrow down to InLink press ENTER

Arrow down to Connect then press ENTER

You should get a SCANNING image and once completed it should recognize the raspberry and show it as below.

IF YOU DO NOT GET A DEVICE READING SUCH AS RASPBERRY THEN TURN BOTH THE TV AND THE PI OFF. TURN ON THE TV FIRST THEN THE PI THEN REPEAT THE PROCESS ABOVE AND IT SHOULD COME UP CORRECTLY. IF IT DOES NOT NEXT STEP WOULD BE TO REPLACE THE HDMI CABLE (cables must be CEC ready, most are but there may be a chance the one being used is not). IF THAT STILL DOES NOT WORK WE CAN TRY TO TROUBLESHOOT WITH YOU ON THE PHONE BUT THERE MAY BE A HIGH CHANCE THAT THIS FEATURE WILL NOT BE AVAILABLE WITH THIS SET UP.

If the above device is showing the next step is to test it!

Turn OFF both the TV and the Pi

Turn ON the Pi only

TV should turn ON!

If TV does not turn ON repeat the process above when looking for a Connected device within the InLink settings.

If you are interested as to what is Overscan you can read more here.

If you have a LG TV click here.

 

 

Sours: https://support.n-compass.tech/045987-Insignia-TV-set-up-OverScan-and-InLink-for-Pi
  1. Tmz motorsports
  2. Alien biomechanical tattoo
  3. Firefox tab groups
  4. Shrek 3 gingerbread man

Insignia NS-28E200NA14 Displaying a list of INlink-compatible (HDMI CEC) devices, Waking INlink-compatible (HDMI CEC) devices

62

NS-28E200NA14 Insignia 28" LED TV

www.insigniaproducts.com

Displaying a list of INlink-compatible (HDMI CEC) devices

You can display a list of HDMI CEC devices that are

connected to your TV.

To display a list of INlink-compatible (HDMICEC)

devices:

1Press MENU. The on-screen menu opens.

2Press W or X to highlight SETTINGS, then press

T or ENTER. The SETTINGS menu opens.

3Press S or T to highlight INlink, then press

ENTER. The SETTINGS · INlink menu opens.

4Press S or T to highlight INlink Device Lists,

then press ENTER. A list of the HDMI

CEC-compatible devices you have connected

opens.

5Press MENU to return to the previous menu, or

press EXIT to close the menu.

Waking INlink-compatible (HDMI CEC) devices

When a connected INlink-compatible device is in

turned off (standby mode), Connect wakes (turns

on) the device.

When a connected INlink-compatible device is

turned on and and you switch to a different video

input source (such as TV), Connect switches to the

device.

To wake INlink-compatible (HDMI CEC) devices:

1Press MENU. The on-screen menu opens.

2Press W or X to highlight Settings, then press T

or ENTER. The SETTINGS menu opens.

3Press S or T to highlight INlink, then press

ENTER. The SETTINGS · INlink menu opens.

4Press S or T to highlight Connect, then press

ENTER. A list of HDMI CEC-compatible devices

you have connected opens.

5Press S or T to highlight the device you want to

connect to, then press ENTER.

6Press MENU to return to the previous menu, or

press EXIT to close the menu.

Sours: https://manualsdump.com/en/manuals/insignia-ns-28e200na14/182232/66
Getting Connected via Ethernet - Insignia Connected TV

Insignia 15"/19"/22"/24" LED-LCD TV

3 Press

or

to highlight INlink, then press

ENTER. The Settings-INlink menu opens.

Settings

-INlink

INlink Control

Device Auto Power Off

TV Auto Power On

Audio Receiver

INlink Device Lists

Connect

Root Menu

OK

Move

E NTE R

Receiver's volume can be controlled by TV's remote control

4 Press

or

to highlight Audio Receiver, then

press ENTER. A menu opens.

5 Press

or

to select On (your TV's remote

control controls the connected audio receiver's

volume) or Off (your TV's remote control does

not control the connected audio receiver's

volume).

6 Press MENU to return to the previous menu, or

press EXIT to close the menu.

Displaying a list of INlink-compatible (HDMI

CEC) devices

You can display a list of HDMI CEC devices that are

connected to your TV.

To display a list of INlink-compatible (HDMI CEC)

devices:

1 Press MENU. The on-screen menu opens.

Picture

Mode

Brightness

Contrast

Color

Tint

Sharpness

Advanced Video

R es et Picture S ettings

OK

Move

E NTE R

Adjust settings to affect picture quality

Picture

Audio

Channels

Settings

On

On

On

On

Select

Previous

E it

ME NU

E XIT

Picture

Audio Channels Settings USB

Custom

60

60

60

0

50

Select

Previous

Exit

ME NU

E XIT

www.insigniaproducts.com

2 Press

or ENTER. The Settings menu opens.

USB

Settings

Parental Controls

Closed Caption

Time

Menu Settings

Auto Input Sensing

Input Labels

INlink

Computer Settings

System Info

Reset to Default

Allow the TV to automatically control CEC devices connected to

the TV via HDMI

3 Press

ENTER. The Settings-INlink menu opens.

Settings

INlink Control

Device Auto Power Off

TV Auto Power On

Audio Receiver

INlink Device Lists

Connect

Root Menu

Go to device list to register new devices or remove devices from

the list

4 Press

then press ENTER. A list of the HDMI

CEC-compatible devices you have connected

appears.

5 Press MENU to return to the previous menu, or

press EXIT to close the menu.

Notes

HDMI cables must be used to connect HDMI

CEC-compatible devices to your TV.

The connected device's HDMI CEC feature must be

turned on.

If you connect an HDMI device that is not HDMI

CEC-compatible, the INlink Control option does not

work.

or

to highlight Settings, then press

Picture

Audio

Channels

Off

OK

Move

Select

Previous

ME NU

E NTE R

or

to highlight INlink, then press

Picture

Audio

Channels

-INlink

OK

Move

Select

Previous

ME NU

E NTE R

or

to highlight INlink Device Lists,

Settings

USB

Exit

E XIT

Settings

USB

On

On

On

On

E it

E XIT

53

Sours: https://www.manualslib.com/manual/411406/Insignia-Ns-19e720a12.html?page=57

Inlink insignia tv

My TV is not displaying the video from the connected CEC device.

  • Make sure that the HDMI cable is connected securely to your TV and the device.
  • Make sure that the device is connected to your TV with an HDMI cable.
  • Make sure that the device is a CEC device. See the documentation that came with the device for more information.
  • Press and make sure that the correct video input source is selected. See Selecting the video input source.
  • Make sure that the INlink feature is turned on. See Turning INlink on or off.
  • Try adjusting the TV picture. See Adjusting the TV picture.
  • If the device is not an Insignia device, it may not be compatible with your TV.

My TV is not playing the audio from the connected CEC device.

  • Make sure that the HDMI cable is connected securely to your TV and the device.
  • Make sure that the device is connected to your TV with an HDMI cable.
  • Make sure that the device is a CEC device. See the documentation that came with the device.
  • Make sure that the TV volume is turned up and not muted.
  • Try adjusting the TV sound. See Adjusting sound settings.
  • Make sure that the TV speakers are turned on and not muted. See Adjusting sound settings.
  • Make sure that the INlink feature is turned on. See Turning INlink on or off.
  • If you have connected an HDMI CEC audio receiver, adjust the volume on the receiver. When your TV detects an audio receiver, the TV speakers turn off and sound plays through receiver speakers only.
  • If the device is not an Insignia device, it may not be compatible with your TV.
  • If you are using a home theater system, sound bar, or external speaker system, make sure that it is turned on and is not muted.
  • If you are using a home theater system, sound bar, or external speaker system, make sure that you have selected the correct output mode.
  • If you are using a home theater system, sound bar, or external speaker system and have connected with a digital cable, go to the Audio menu, highlight , then press . Set the option to . See the option in Adjusting sound settings.

My TV’s remote control does not control the device.

  • Make sure that there are no obstructions between the remote control and the remote control sensors on your TV and the device.
  • Depending on the device, all the buttons may not work.
  • Make sure that the INlink feature is turned on. See Turning INlink on or off.
  • If you are trying to control the volume on an HDMI CEC audio receiver using your TV remote control, make sure that the option on the Audio menu is set to . See Adjusting sound settings.
  • If you are trying to control the volume on an HDMI CEC audio receiver using your TV remote control, make sure that the option on the INlink menu is set to . See Turning Audio Receiver on or off.
  • The device may not support this feature. See the documentation that came with the device for more information.

The device does not show up in the INlink Device list.

  • Make sure that the device is turned on.
  • Make sure that the HDMI cable is connected securely to your TV and the device.
  • Make sure that the device is connected to your TV with an HDMI cable.
  • Make sure that the INlink feature is turned on. See Turning INlink on or off.
  • Make sure that the device is a CEC device. See the documentation that came with the device.
  • If the device is not an Insignia device, it may not be compatible with your TV.

My device does not turn off when I turn off my TV.

My TV does not turn on when I turn on my device.

The setting on the INlink menu keeps turning back on after it is turned off.

  • When is set to and is set to and you make an adjustment to the audio receiver (for example, turn the volume knob or press a button), is automatically set to . To prevent this from happening, turn off the INlink feature. See Turning INlink on or off.

Two volume bars appear when adjusting the volume.

  • When you adjust the volume on the audio receiver or with the TV remote control, a double volume bar appears, one for the TV volume and one for the audio receiver volume.

I cannot select the option on the INlink menu.

OR

The device’s root menu does not open when I select on the INlink menu.

  • The device may not support this feature. See the documentation that came with the device for more information.
Sours: http://storage.bestbuy.com/usweb/html/9215028/user-manual/english/Content/NS-19D220NA16_19D220MX16/Troubleshooting-INlink-CEC-device.htm
INSIGNIA 32 1080p 60Hz LED HD TV : Review of Menus \u0026 Settings

.

Now discussing:

.



205 206 207 208 209