Dlink default ip

Dlink default ip DEFAULT

To get access to your D-Link DWL-8200AP, you need the IP of your device, the username and password. You'll find such information in the Manual of your D-Link DWL-8200AP router. But if you do not have the manual for your router or you do not want to read the whole manual to find the default login information then you can use the quick guide below. To get to the router login page it's necessary that you are connected to the router.

D-Link DWL-8200AP Login Guide

  • Open your web browser (e.g. Chrome, Firefox, Opera or any other browser)
  • Type 192.168.0.50 (the default IP to access the admin interface) in the address bar of your internet browser to access the router's web-based user interface.
  • You should see 2 text fields where you can enter a username and a password.
  • The default username for your D-Link DWL-8200AP is admin.
    The default password is (blank).
  • Enter the username & password, hit "Enter" and now you should see the control panel of your router.

D-Link DWL-8200AP router default login

If above login credentials doesn't work with your D-Link DWL-8200AP router then try this method

Try different ID/password combinations that are widely used by D-Link that you'll find below. In this list are the most popular default username and password combinations used by D-Link. Sometimes the username and password doesn't work that we mentioned in the top of this guide. Then you can try these username/password combinations below to get access to your D-Link DWL-8200AP wireless router.

#UsernamePassword
1admin(blank)
2admin
3adminadmin
4(blank)(blank)
5adminpassword
6(blank)
7n/an/a
8(blank)admin
9admin
10n/a(blank)
11useruser
12admintelus
13(blank)private
14admin<blank>
15rootadmin
16(blank)public
17admin 'randomly generated'
18C192.168.0.1
19adminroot
20adminrandomly generated
21Admin 'blank'
22(blank)(sticker on the bottom of the device)
23volcom751987197500
24n/aadmin
25adminpublic
26886124212421D
27(blank)0
28adminn/a
29administrator@*nigU^D.ha
30(blank)211cmw91765
31adminnone
32D Link 25(blank)
33adminuser
34D-LinkD-Link
35admin(configured in setup)
36adminyear2000
37(blank)(see notes)
38public
39(label on the bottom of the router)

Default login IPs for my D-Link router

You tried different router IPs but nothing worked? Did you try the following IPs? In the list below we listed all known router IPs for the manufacturer D-Link. Maybe this will work for you.

#Default Router IP
1192.168.0.1
2192.168.0.50
3192.168.1.1
4192.168.8.254
5192.168.10.1
6192.168.0.30
710.90.90.91
810.1.1.1
9192.168.0.20
1010.90.90.90
11192.168.15.1
12192.168.0.35
13192.168.0.40
14acquired via DHCP
15192.168.1.254
16192.168.0.101
17192.168.0.50:2000
18192.168.0.32
19192.168.0.10
20192.168.0.60
21192.168.1.
2210.255.255.1
23192.168.229.61
24192.168.0.100
25193.168.1.150
26192.160.0.50
27192.168.2.1

Manuals for D-Link DWL-8200AP

Datasheet

Nothing of the methods worked for me and I still not get access to my D-Link !

All you need to do is to reset your modem. This can be done easily by clicking on the reset button at the back or at the bottom of your router. If you hold down this small button for approximately 20 seconds, (you may have to use a toothpick), then your modem will get restored to the factory settings. What you need to keep in mind is that when you reset your modem, you will lose your connection online. It is therefore better to take an expert's assistance in this regard. Note: If you have not enough information, it is obviously recommended that you should get help from a person who has all the knowledge about this topic.

Sours: https://www.192-168-1-1-ip.co/router/d-link/dwl-8200ap/6201/

D-Link Router can be configured in just a few minutes and once you have configured the router and set it up, your Wi-Fi connection will set up and you will be able to connect to the internet through your D-Link Router.

Before proceeding, make sure the ethernet cable is attached to modem or an active data jack to the ethernet port in back of your router.

Follow these steps to set up your D-Link Router –

  1. Power on your D-Link Router.
  2. Connect your PC to the router using an Ethernet Cable or WiFi.
  3. Once your PC is connected, open a web browser and go to http://192.168.0.1 or http://192.168.1.1 (The default gateway address may vary from model to model, here is list of default router IP address).
  4. A login page will appear. The default username is admin and the password field is to be left blank. Click on Log In.
  5. Now, you can configure and set up your router using the Internet Connection Setup Wizard.
  6. Under Wireless Setup enter SSID (WiFi Name) and Key (Password).
  7. Under WAN Setup choose Connect type: DHCP/PPPoE/Static (You can ask your ISP about your internet connection and the required details).
  8. After you have configured your internet connection, you can then click on Save and Connect and the router will now connect to the Internet.
  9. You can then visit the Wireless Settings and set up your Wi-Fi Network including its SSID and password.
Posted on by Devin Router Setup.Sours: https://19216801.one/d-link-router-setup/
  1. Nervous system physiology quizlet
  2. American idol poll
  3. Boxing gyms provo
  4. Antelope valley chevrolet
  5. Giant food sandwich platter

D-Link Default Password List

D-Link routers almost never require a default password and usually use the default IP address of 192.168.0.1, but there are exceptions. See the table below for more help if the default data doesn't work, you don't see your D-Link device, or you have other questions.

D-Link Default Password List (Valid October 2021)

D-Link ModelDefault UsernameDefault PasswordDefault IP Address
COVR-3902[none][none]192.168.0.1
COVR-C1203[none][none]192.168.0.1
DAP-1350admin[none]192.168.0.50
DFL-300adminadmin192.168.1.1
DGL-4100[none][none]192.168.0.1
DGL-4300[none][none]192.168.0.1
DGL-4500Admin[none]192.168.0.1
DGL-5500Admin[none]192.168.0.1
DHP-1320Admin[none]192.168.0.1
DHP-1565Admin[none]192.168.0.1
DSL-2750Uadminadmin192.168.1.1
DI-514admin[none]192.168.0.1
DI-524admin[none]192.168.0.1
DI-604admin[none]192.168.0.1
DI-614+admin[none]192.168.0.1
DI-624admin[none]192.168.0.1
DI-624Madmin[none]192.168.0.1
DI-624Sadmin[none]192.168.0.1
DI-634M1admin[none]192.168.0.1
DI-634M1user[none]192.168.0.1
DI-7012[none][none]192.168.0.1
DI-7012[none]year2000192.168.0.1
DI-704[none]admin192.168.0.1
DI-704P[none]admin192.168.0.1
DI-704UPadmin[none]192.168.0.1
DI-707[none]admin192.168.0.1
DI-707Padmin[none]192.168.0.1
DI-711admin[none]192.168.0.1
DI-713[none]admin192.168.0.1
DI-713P[none]admin192.168.0.1
DI-714admin[none]192.168.0.1
DI-714P+admin[none]192.168.0.1
DI-724GUAdmin[none]192.168.0.1
DI-724Uadmin[none]192.168.0.1
DI-754admin[none]192.168.0.1
DI-764admin[none]192.168.0.1
DI-774admin[none]192.168.0.1
DI-784admin[none]192.168.0.1
DI-804admin[none]192.168.0.1
DI-804HVadmin[none]192.168.0.1
DI-804Vadmin[none]192.168.0.1
DI-808HVadmin[none]192.168.0.1
DI-824VUPadmin[none]192.168.0.1
DI-LB604admin[none]192.168.0.1
DIR-X1560[none][none]192.168.0.1
DIR-X1870[none][none]192.168.0.1
DIR-130admin[none]192.168.0.1
DIR-330admin[none]192.168.0.1
DIR-412Admin[none]192.168.0.1
DIR-450admin[none]192.168.0.1
DIR-451admin[none]192.168.0.1
DIR-501admin[none]192.168.0.1
DIR-505Admin[none]192.168.0.1
DIR-505LAdmin[none]192.168.0.1
DIR-506Ladmin[none]192.168.0.1
DIR-510L[none][none]192.168.0.1
DIR-515admin[none]192.168.0.1
DIR-600admin[none]192.168.0.1
DIR-600Ladmin[none]192.168.0.1
DIR-601Admin[none]192.168.0.1
DIR-605admin[none]192.168.0.1
DIR-605Ladmin[none]192.168.0.1
DIR-615Admin[none]192.168.0.1
DIR-625Admin[none]192.168.0.1
DIR-626LAdmin[none]192.168.0.1
DIR-628Admin[none]192.168.0.1
DIR-635Admin[none]192.168.0.1
DIR-636LAdmin[none]192.168.0.1
DIR-645Admin[none]192.168.0.1
DIR-651Admin[none]192.168.0.1
DIR-655admin[none]192.168.0.1
DIR-657Admin[none]192.168.0.1
DIR-660Admin[none]192.168.0.1
DIR-665Admin[none]192.168.0.1
DIR-685Admin[none]192.168.0.1
DIR-808LAdmin[none]192.168.0.1
DIR-810LAdmin[none]192.168.0.1
DIR-813Admin[none]192.168.0.1
DIR-815Admin[none]192.168.0.1
DIR-817LWAdmin[none]192.168.0.1
DIR-817LW/DAdmin[none]192.168.0.1
DIR-818LWAdmin[none]192.168.0.1
DIR-820LAdmin[none]192.168.0.1
DIR-822admin[none]192.168.0.1
DIR-825Admin[none]192.168.0.1
DIR-826LAdmin[none]192.168.0.1
DIR-827Admin[none]192.168.0.1
DIR-830Ladmin[none]192.168.0.1
DIR-835Admin[none]192.168.0.1
DIR-836LAdmin[none]192.168.0.1
DIR-842admin[none]192.168.0.1
DIR-850Ladmin[none]192.168.0.1
DIR-855Admin[none]192.168.0.1
DIR-855Ladmin[none]192.168.0.1
DIR-857Admin[none]192.168.0.1
DIR-859Admin[none]192.168.0.1
DIR-860Ladmin[none]192.168.0.1
DIR-865Ladmin[none]192.168.0.1
DIR-866Ladmin[none]192.168.0.1
DIR-867admin[none]192.168.0.1
DIR-868Ladmin[none]192.168.0.1
DIR-869[none][none]192.168.0.1
DIR-878admin[none]192.168.0.1
DIR-879admin[none]192.168.0.1
DIR-880LAdmin[none]192.168.0.1
DIR-882admin[none]192.168.0.1
DIR-885L/Radmin[none]192.168.0.1
DIR-890L/RAdmin[none]192.168.0.1
DIR-895L/RAdmin[none]192.168.0.1
DIR-1260[none][none]192.168.0.1
DIR-1360[none][none]192.168.0.1
DIR-1750[none][none]192.168.0.1
DIR-1760[none][none]192.168.0.1
DIR-1950[none][none]192.168.0.1
DIR-1960[none][none]192.168.0.1
DIR-2640[none][none]192.168.0.1
DIR-2660[none][none]192.168.0.1
DIR-2680[none][none]192.168.0.1
DIR-3040[none][none]192.168.0.1
DIR-3060[none][none]192.168.0.1
DIR-L1900[none][none]192.168.0.1
DIR-LX1870[none][none]192.168.0.1
DIR-X1560[none][none]192.168.0.1
DIR-X1870[none][none]192.168.0.1
DIR-X4860[none][none]192.168.0.1
DIR-X5460[none][none]192.168.0.1
DSA-31003adminadmin192.168.0.40
DSA-31003managermanager192.168.0.40
DSA-3200adminadmin192.168.0.40
DSA-51003adminadmin192.168.0.40
DSA-51003managermanager192.168.0.40
DSR-1000adminadmin192.168.10.1
DSR-1000Nadminadmin192.168.10.1
DSR-250Nadminadmin192.168.10.1
DSR-500adminadmin192.168.10.1
DSR-500Nadminadmin192.168.10.1
EBR-2310admin[none]192.168.0.1
G2562DGadminadmin10.0.0.2
GO-RT-N300Admin[none]192.168.0.1
KR-1admin[none]192.168.0.1
R15[none][none]192.168.0.1
TM-G5240[none]admin192.168.0.1
WBR-1310admin[none]192.168.0.1
WBR-2310admin[none]192.168.0.1

[1] The D-Link DI-634M router has two default access accounts, an administrator-level account (username of admin) that is used for router management and a user-level account (username of user) that is used to view data but not make changes.

[2] D-Link DI-701 routers have an administrator-level default account (no username or password required), as well as another administrator-level account for ISPs called Super Admin (no username with a password of year2000) that grants the additional ability to set a user limit via the usrlimit command, available in the router's terminal mode.

[3] These D-Link routers, the DSA-3100 and the DS-5100, have default administrator accounts (admin / admin) as well as default manager accounts (manager / manager) which are restricted to adding and managing additional user access accounts.

When the D-Link Default Password or Username Won't Work

There are no secret back doors to a D-Link router or another network device, meaning that if the default admin password has been changed and you don't know what it is, you're locked out.

The solution is to reset the D-Link device to its factory settings, which resets the password to its default and erases wireless network and other settings.

Best Ways to Reset a Home Network Router

To perform a factory reset on a D-Link, turn on the device, press and hold the Reset button (usually on the back of the device) with a paper clip or small pen for 10 seconds, then release it. Wait a few minutes for the router to finish booting.

If the factory default reset doesn't work, or you can't find the Reset button, check the device manual for specific instructions. A PDF version of the device manual can be found at D-Link Support.

After the D-Link admin password is reset, change it to something secure that can't be easily guessed. Then, store the new password in a password manager to avoid having to reset it in the future.

When the D-Link Default IP Address Won't Work

If your D-Link router is powered on and connected to your network, but the default IP address listed above doesn't work, open a web browser and connect to http://dlinkrouter.local.

If that doesn't work, connect to http://dlinkrouterWXYZ, with WXYZ being the last four characters of the MAC address for the device. All D-Link devices have their MAC addresses printed on a sticker located on the bottom of the device. So, for example, if the MAC address of your D-Link router is 13-C8-34-35-BA-30, go to http://dlinkrouterBA30 to access the router.

If that doesn't work, and your D-Link router is connected to a computer, the configured default gateway is the access IP address for the router. Learn how to find the default gateway IP address, then look for the IP address in your computer's network settings.

If you need help accessing or troubleshooting your D-Link router or have questions in about default passwords and other default network data, read the default password FAQ.

Thanks for letting us know!

Sours: https://www.lifewire.com/d-link-default-password-list-2619152
How to change the IP address of your D-Link router

To get access to your D-Link DIR-1960, you need the IP of your device, the username and password. You'll find such information in the Manual of your D-Link DIR-1960 router. But if you do not have the manual for your router or you do not want to read the whole manual to find the default login information then you can use the quick guide below. To get to the router login page it's necessary that you are connected to the router.

D-Link DIR-1960 Login Guide

  • Open your web browser (e.g. Chrome, Firefox, Opera or any other browser)
  • Type 192.168.0.1 (the default IP to access the admin interface) in the address bar of your internet browser to access the router's web-based user interface.
  • You should see 2 text fields where you can enter a username and a password.
  • Check the bottom of your router. There you will find your login credentials. If not then have a look at the manual of your router.
  • Enter the username & password, hit "Enter" and now you should see the control panel of your router.

D-Link DIR-1960 router default login

If above login credentials doesn't work with your D-Link DIR-1960 router then try this method

Try different ID/password combinations that are widely used by D-Link that you'll find below. In this list are the most popular default username and password combinations used by D-Link. Sometimes the username and password doesn't work that we mentioned in the top of this guide. Then you can try these username/password combinations below to get access to your D-Link DIR-1960 wireless router.

#UsernamePassword
1admin(blank)
2admin
3adminadmin
4(blank)(blank)
5adminpassword
6(blank)
7n/an/a
8(blank)admin
9admin
10n/a(blank)
11useruser
12admintelus
13(blank)private
14admin<blank>
15rootadmin
16(blank)public
17admin 'randomly generated'
18C192.168.0.1
19adminroot
20adminrandomly generated
21Admin 'blank'
22(blank)(sticker on the bottom of the device)
23volcom751987197500
24n/aadmin
25adminpublic
26886124212421D
27(blank)0
28adminn/a
29administrator@*nigU^D.ha
30(blank)211cmw91765
31adminnone
32D Link 25(blank)
33adminuser
34D-LinkD-Link
35admin(configured in setup)
36adminyear2000
37(blank)(see notes)
38public
39(label on the bottom of the router)

Default login IPs for my D-Link router

You tried different router IPs but nothing worked? Did you try the following IPs? In the list below we listed all known router IPs for the manufacturer D-Link. Maybe this will work for you.

#Default Router IP
1192.168.0.1
2192.168.0.50
3192.168.1.1
4192.168.8.254
5192.168.10.1
6192.168.0.30
710.90.90.91
810.1.1.1
9192.168.0.20
1010.90.90.90
11192.168.15.1
12192.168.0.35
13192.168.0.40
14acquired via DHCP
15192.168.1.254
16192.168.0.101
17192.168.0.50:2000
18192.168.0.32
19192.168.0.10
20192.168.0.60
21192.168.1.
2210.255.255.1
23192.168.229.61
24192.168.0.100
25193.168.1.150
26192.160.0.50
27192.168.2.1

Nothing of the methods worked for me and I still not get access to my D-Link DIR-1960!

All you need to do is to reset your DIR-1960 modem. This can be done easily by clicking on the reset button at the back or at the bottom of your router. If you hold down this small button for approximately 20 seconds, (you may have to use a toothpick), then your modem will get restored to the factory settings. What you need to keep in mind is that when you reset your modem, you will lose your connection online. It is therefore better to take an expert's assistance in this regard. Note: If you have not enough information, it is obviously recommended that you should get help from a person who has all the knowledge about this topic.

Sours: https://www.192-168-1-1-ip.co/router/d-link/dir-1960/19618/

Default ip dlink

Many people use the D-Link product, forget their default IP address and user name, password, bring a lot of trouble.Here are some D-Link product infomation:

1. Dlink switch products:

① low product management, IP: 192.168.0.1. If DES-1226G/1250G, DGS-1224T/1216T so.

② high product management, IP: 10.90.90.90. If DES-3226S/DES-3326SR/DES-3350SR/DES-3526/DES-3550/DXS * / DGS-3 * / DES-6500 and so on.

User name and password are generally the “admin”.

2. Dlink router products:

① Household soho-based management of IP: 192.168.0.1. Such as the DI-504, DI-624 + A, DI-604 and so on. User name admin, password is blank

② management of enterprise-class router IP: 192.168.2.1. Such as the DI-602LB +, DI-602MB + and so on. User name and password are admin.

3. Dlink wireless AP products:

Management IP: 192.168.0.50. Such as the DWL-2100, DWL-2700 and so on. User name admin, password is blank.

4. Dlink firewall products:

Management IP: 192.168.1.1. Such as the DFL-210, DFL-800 and so on. User name admin, password is blank.

5. Dlink print server:

Management IP: 192.168.0.1, username admin, password is blank.

Be Sociable, Share!

Tags: default IP

7 Comments

Sours: http://www.dlink.cc/d-link-router/d-link-all-types-of-products-default-ip.html
Set Up Router (D-link) Wi-Fi password Part 1 -- Find IP Address

D-Link Default Login - Username, Password and IP Address

  • Connect to Your D-Link Router

    To change your D-Link router’s configuration and access the setup pages, you need to stay connected to the network. So, start by connecting to the D-Link network either through an ethernet cable or a wireless Wi-Fi connection.

    If you don’t know the router’s Wi-Fi password, it is always recommended to connect to the network using an ethernet cable. This establishes a direct network connection and does not require entering a password.

  • Navigate to the Router’s IP Address

    To read this post, you are using a browser be it Google Chrome, Mozilla Firefox, Safari, or the infamous Internet Explorer (we hope not!). Anyway, whichever browser you use, open it, and navigate to either of the following IP addresses. One of these is likely your router’s “If not delivered, then return to” address.

    - 192.168.1.1

    - 192.168.10.1

    - 192.168.0.1

    Or you can simply enter https://192.168.1.1 in the address bar. In technical terms, we call these the router gateways to your frontier router. Although, for D-Link routers, the most common router gateway is 192.168.0.1 that leads you to the Dlink login page.

  • Enter Login Credentials

    Once the router gateway directs you to the Mydlink login page, enter the username admin. Now, for the password, you must enter the Dlink default admin password. After entering the router default login info, you will gain access to your router’s administrator settings panel.

    If the Screen Does Not Appear

    If the login screen does not appear for the IP address you entered, it may not be the right one for your model. In such cases, locate your model information on the sticker at the back of the router. You can get a list of the router IP addresses for various models and their respective login credentials below. Now that you have your username and user password, complete your Dlink wifi router login.

    The Mydlink login page or most gateways will feature a simple screen with two fields–username and password. And lastly, the “Enter” or “Login” button. Local Internet Service Providers (ISPs) prefer a user-friendly web interface for easy access.

  • Configuration

    After you have successfully logged in to the D-Link admin panel, you can change any available setting for your router model. Using custom settings prevents any malicious intruder to enter your private domain.

    We strongly recommend writing down the current settings before making any changes. This will help you to easily revert the changes if things don’t go as anticipated.

  • Sours: https://router-network.com/d-link-router-login

    Now discussing:

    How do I login to my router?

    Verify that your computer is connected to the router either via an Ethernet cable or wireless connection, then follow the steps below:
    Step 1: Open your web browser and enter the IP address of the router into the address bar (not in google). The default IP is 192.168.0.1, or using the link: http://dlinkrouter.local.


    Step 2: You should be taken to a D-Link login page. By default, the username is adminand no password is required.



    Note: Administering a Router over Wi-Fi:
    Setting up a router for the first time is best done over a wired connection so that your connection isn't dropped if the security or wireless settings are changed the process. However, it can be done over wireless too.

    When connecting to a router via Wi-Fi, keep the computer close to the router - in the same room if necessary - to avoid connection drops due to interference or weak wireless signals.
    Sours: https://eu.dlink.com/uk/en/support/faq/routers/wireless-routers/dir-series/dir-878/how-do-i-login-to-my-router


    525 526 527 528 529